Hide-A-Hose

Showing 31–45 of 51 results

  • HS4000 Valve Locking Sleeve Replacement Kit

    HS4000 Valve Sleeve Replacement Kit includes a Top Cap, Rubber Sleeve, six screws, and an instruction sheet.  This replacement kit can be used for either HS3000 or HS4000 valves.  (Before removing the valve from the wall, the whole hose must be removed from the valve).

    How to replace HS4000 Locking Sleeve

    $13.30
  • Stand Alone Mounting Kit for HS4000 Valve

    The Stand Alone Mounting Kit is a 2-part rough in box for mounting the HS4000 central vacuum trim kit where installation in a wall cavity is not desired. Typical applications are mounting in a cabinet, closet, or on an external wall. (HS4000 Trim Kit purchased separately). Review HS4000 installation guide and Stand Alone Installation Guide before installing Stand Alone Mounting Kit.

    $61.71
  • HS3000/HS4000 Valve Rough-In Kit

    HS3000 Rough-In Frame is required for the HS4000 Valve new construction or retro-fit installations. The Rough-In Kit includes: 1 rough in frame, 1 rough in pipe fitting, 1 reducer, 1 mud cover, 1 retainer band, 4 mud cover screws. Refer to HS4000 installation guide for mounting instructions.

    $41.47
  • HS5000 Valve Rough-In Kit

    This Rough-In Frame is required for HS5000 new construction or retro-fit installations (exception: installation with concrete wall kit). The Rough In Kit includes: 1 rough in frame, 1 rough in pipe fitting, 1 reducer, 1 mud cover, 4 mud cover screws.

    $41.82
  • HS4000 Valve Trim Kit

    The Valve Trim Kit includes: inlet valve, finish door, low voltage switch, 4 screws, 2 wire nuts, 1 silicone pack. Available in white, almond, or black. Refer to HS4000 installation guide for valve trim instructions.

    $249.95
  • HS5000 Valve Trim Kit

    The Valve Trim Kit includes: inlet valve, finish door, low-voltage switch, 4 screws, 2 wire nuts. New features include smaller size, improved rubber door seal, improved hose-locking system, simple on/off switch, adjusts to wall thicknesses up to 1 ½ inches (3.8 cm). Available in white or almond. Refer to HS5000 installation guide for valve trim instructions.

    $249.95
  • Hose End Cap, Black (Hose Kit)

    The black end cap fits into the end of a Hide-A-Hose Hose Kit, holding the sock in place. (Black and white end caps are NOT interchangeable).

    $1.61
  • Hose End Cap, White (RapidFlex)

    The white end cap fits into the end of a Hide-A-Hose RapidFlex Hose, keeping the end of the hose round.  (Black and white end caps are NOT interchangeable).

    $2.58
  • RapidFlex Mini-Cuff (Blue 1 3/8”)

    The Hide-A-Hose RapidFlex Mini-Cuff connects the hose to a Ready Grip Direct Connect handle.

    The Mini-Cuff also offers the convenience of connecting directly to accessories included in the tool kits.

    This cuff is 1 3/8” and will only fit the RapidFlex hose.  (See HS5000H4 for a SmartSoc hose cuff.)

    The mini-cuff acts as a stop when the hose is retracted into the valve.  If the cuff comes off the hose, screw the cuff back into the hose, counterclockwise, until it is firmly seated against the end of the hose.  If the end of the hose has been damaged, trim off 2” – 3” with sharp scissors before installing the new cuff.  Do not retract the hose without the cuff.

    (If additional friction is needed to hold the hose in place when closing the valve door, the mini-cuff accepts 1 or 2 O-Rings.  See Part#HS500123)

    $2.69
  • SmartSoc Mini-Cuff (Black 1 ¼”)

    The Hide-A-Hose SmartSoc Mini-Cuff connects the hose to a Ready Grip Direct Connect handle.

    The Mini-Cuff also offers the convenience of connecting directly to accessories included in our tool kits.

    This cuff is 1 ¼” and will only fit the SmartSoc hose.  (See HS5000H5 for a RapidFlex hose cuff.)

    The mini-cuff acts as a stop when the hose is retracted into the valve.  If the cuff comes off the hose, tuck ¼” – ½” of sock into the hose and screw the cuff back into the hose, counterclockwise, until it is firmly seated against the end of the hose.  Do not retract the hose without the cuff.

    (If additional friction is needed to hold the hose in place when closing the valve door, the mini-cuff accepts 1 or 2 O-Rings. See Part#HS500121)

    $1.75
  • RapidFlex Cuff/O-Ring Kit

    RapidFlex Mini-Cuff replacement kit includes HS5000H5 Mini-Cuff (blue – 1 3/8”) and two O-Rings.

    $3.53
  • SmartSoc Cuff/O-Ring Kit

    SmartSoc Mini-Cuff replacement kit includes HS5000H4 Mini-Cuff (black – 1 ¼”) and two O-Rings.

    $3.53
  • O-Ring for Mini-Cuff 10-Pack

    10-pack of O-rings (218 Duro 70 Buna-N Nitrile) for either HS5000H4 SmartSoc cuff or HS5000H5 RapidFlex cuff.

    $2.64
  • Hose Sock Replacement Kit

    Hose sock replacement kits include a hose sock pre-loaded on a cardboard tube and a tension guide for ease of installation. Refer to Hose Sock Replacement Instructions.

    NOTE: This item should only be used to replace the hose sock on a SmartSoc hose and is Not for use on a RapidFlex hose. The RapidFlex hose is a larger diameter than the SmartSoc hose.

    $46.68$89.33
  • SmartSoc Hose

    Hose kits include a pre-installed sock that protects millwork and furniture. Our new hose kits feature the mini-cuff, which allows tools to fit directly onto the hose cuff for easier use. Hose lengths can be customized to fit the home-owner’s needs. Refer to How to Customize Hose Length. A hose kit can be washed without removing the sock. Remove the entire hose kit from the valve and wash the hose w/sock in a bathtub using a small amount of dish or laundry soap. Rinse thoroughly and hang to dry before retracting back into the valve.

    $105.95$190.95
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare
Shopping cart close