The 6000 PRO Rough-In Valve Kit is required for both new construction and retro-fit installations. The Rough-In Valve Kit includes: 1 rough-in valve, 1 mounting brace, 1 reducer, 1 yellow mud cover, 4 mud cover screws, and a leveling shim in case the stud is not level.
The New 6000 PRO features a simple and intuitive Push and Pull lock, giving you the flexibility to clean at any length of hose. The valve housing is now installed during the rough-in process (unlike previous Hide-A-Hose valves where the valve housing was installed at trim). The 6000 PRO is mounted to the inside of the stud to avoid drywall bowing, which can occur with other central vacuum valves which mount to the front of the stud.
The 6000 PRO Trim Kit includes the finish door with a low-voltage switch, 4 screws, and 2 spade connectors.
The 6000 PRO has an enlarged sealing surface on the door to ensure maximum cleaning power. The door opens and closes with a smooth, solid feel enhanced by magnets. The magnets are pressed in from the back, keeping them out of reach of children. The Trim Door works with a wall thickness of up to 1″. For thicker walls, Door Extension Kits are 3/4″ and can be easily glued and stacked to adjust for wall thickness. Low voltage wires connect directly to the switch included on the Trim Kit Door.
Hide-A-Hose large radius elbows allow the retractable hose to travel freely through the vacuum tubing. Large radius elbows are available in 90° (HS202140), 45° (HS202141), and 22.5° (HS202142). Refer to installation guide diagrams for pipe run recommendations.
Hide-A-Hose large radius elbows allow the retractable hose to travel freely through the vacuum tubing. Large radius elbows are available in 90° (HS202140), 45° (HS202141), and 22.5° (HS202142). Refer to installation guide diagrams for pipe run recommendations.
Hide-A-Hose large radius elbows allow the retractable hose to travel freely through the vacuum tubing. Large radius elbows are available in 90° (HS202140), 45° (HS202141), and 22.5° (HS202142). Refer to installation guide diagrams for pipe run recommendations.
Industry standard central vacuum pipe for seamless connections into central vacuum elbows/connection/fittings. Central vacuum pipe is thin, only 1/16″ thick with a 2″ outer diameter whereas SCH-40 (schedule 40) PVC pipe is measured by inner diameter and is thicker (3/16″).
Made from virgin PVC. Manufactured to ASTM-F 2158 standards and has no schedule rating or pressure rating since it is not irrigation related.
The Hide-A-Hose Bare Floor Tool Kit includes tools chosen to extend the cleaning versatility of a Hide-A-Hose system specifically for wood and tile floors. The kit includes the a stainless steel adjustable wand with comfort seal, a 12 inch floor brush, dusting brush, upholstery brush, crevice tool, and clip-on tool caddy. (Handles sold separately: see Ready Grip)
Having a Hide-A-Hose valve in your garage is a favorite for many of our customers. Order an extra Valve installation kit for your garage and order the Hide-A-Hose Garage tool kit for cleaning your cars and other things in your garage.
The Hide-A-Hose Garage Kit includes a basic handle, adjustable wand, 12” floor brush, dusting brush, upholstery brush, crevice tool, clip-on tool caddy, and wall wand clamp.
The Standard Valve Garage Kit connects directly to the power unit installed in your garage. This will save you the cost of another Hide-A-Hose Install kit, however you will need to store the hose when you’re finished cleaning. This comes with a 30 ft. standard hose.
The Hide-A-Hose stainless steel telescoping wand has a button lock and comfort seal for simple and secure connection to any Hide-A-Hose handle. The wand extends from approximately 25″ to 38″ at one inch intervals for comfortable use.
The EBK 250 Battery Power Brush is a versatile and powerful addition to your Hide-A-Hose Central Vacuum System.
Equipped with interchangeable brush rollers, the EBK 250 adapts effortlessly to different surfaces including hard floors, rugs, and carpets. Its LED lighting reveals dust and debris in poorly lit areas, while the ambient lighting adds a touch of sophistication to its practical design. The on-wand rechargeable battery pack delivers 90 minutes of full performance.
With a 9.8 inch working width, the EBK 250 facilitates comfortable and efficient cleaning. Additionally, its integrated on-board cleaning tool swiftly removes tangled hair and threads from the brush roller, ensuring hassle-free maintenance.
Say goodbye to cumbersome cords and hello to freedom with the KX1000. Whether you’re vacuuming stairs, upholstery, or high-traffic areas, this versatile powerhead delivers superior suction power and performance every time.
The CX1000 Battery Power Nozzle has a huge performance advantage over traditional electric turbine nozzles. The impeller fan pushes air toward the hose, while the central vacuum suction pulls air through the hose, creating a “push and pull” boost to cleaning power.
Product Features
44 Volt Lithium Ion Battery with 60 minutes of run time
Charge time: 2 hours
Ultra-bright LED headlight illuminates your cleaning path
Squeegee for bare floor cleaning
Unique bottom plate ensures easy operation on all carpet types
Rubber wheels and bumper protect furniture and baseboards
Aluminum handle tube works with Hide-A-Hose “Ready Grip Handles”
4 year warranty on vacuum, 2 year warranty on battery
The Vacuflo TurboCat Powerhead is an air-driven turbine that harnesses the power of your central vacuum system for deep, thorough cleaning. No electricity is required. The TurboCat is designed to be lightweight and have the ability to easily slide under sofas, beds, and dressers. The Deep Sweep Brush Roller removes dirt deep within your carpet.