The TK 284 Turbine-Powered Brush harnesses the vacuum cleaner’s air and uses that power to turn a cylindrical brush. This simple and cost-effective system brings new levels of cleaning to standard cleaners.
Specifications:
Swivel-joint
Roller-brush with durable double-Vshaped nylon bristles
Hide-A-Hose large radius elbows allow the retractable hose to travel freely through the vacuum tubing. Large radius elbows are available in 90° (HS202140), 45° (HS202141), and 22.5° (HS202142). Refer to installation guide diagrams for pipe run recommendations.
Hide-A-Hose large radius elbows allow the retractable hose to travel freely through the vacuum tubing. Large radius elbows are available in 90° (HS202140), 45° (HS202141), and 22.5° (HS202142). Refer to installation guide diagrams for pipe run recommendations.
Hide-A-Hose large radius elbows allow the retractable hose to travel freely through the vacuum tubing. Large radius elbows are available in 90° (HS202140), 45° (HS202141), and 22.5° (HS202142). Refer to installation guide diagrams for pipe run recommendations.
This conversion frame is installed when converting from the original HS2000 series valves to HS4000 valves. The conversion frame is used as an alternative to sheetrock repair. For conversion, 1-HS3000 Rough-In Kit, 1-HS4000 trim kit, and 1-conversion frame are required. Available in white (HS300051) or almond (HS300052). Refer to HAH Trim Conversion Installation Guide.
HS4000 Valve Sleeve Replacement Kit includes a Top Cap, Rubber Sleeve, six screws, and an instruction sheet. This replacement kit can be used for either HS3000 or HS4000 valves. (Before removing the valve from the wall, the whole hose must be removed from the valve).
The Stand Alone Mounting Kit is a 2-part rough in box for mounting the HS4000 central vacuum trim kit where installation in a wall cavity is not desired. Typical applications are mounting in a cabinet, closet, or on an external wall. (HS4000 Trim Kit purchased separately). Review HS4000 installation guide and Stand Alone Installation Guide before installing Stand Alone Mounting Kit.
HS3000 Rough-In Frame is required for the HS4000 Valve new construction or retro-fit installations. The Rough-In Kit includes: 1 rough in frame, 1 rough in pipe fitting, 1 reducer, 1 mud cover, 1 retainer band, 4 mud cover screws. Refer to HS4000 installation guide for mounting instructions.
This Rough-In Frame is required for HS5000 new construction or retro-fit installations (exception: installation with concrete wall kit). The Rough In Kit includes: 1 rough in frame, 1 rough in pipe fitting, 1 reducer, 1 mud cover, 4 mud cover screws.
The Valve Trim Kit includes: inlet valve, finish door, low voltage switch, 4 screws, 2 wire nuts, 1 silicone pack. Available in white, almond, or black. Refer to HS4000 installation guide for valve trim instructions.