HS3000 Rough-In Frame is required for the HS4000 Valve new construction or retro-fit installations. The Rough-In Kit includes: 1 rough in frame, 1 rough in pipe fitting, 1 reducer, 1 mud cover, 1 retainer band, 4 mud cover screws. Refer to HS4000 installation guide for mounting instructions.
The Valve Trim Kit includes: inlet valve, finish door, low voltage switch, 4 screws, 2 wire nuts, 1 silicone pack. Available in white, almond, or black. Refer to HS4000 installation guide for valve trim instructions.
The Stand Alone Mounting Kit is a 2-part rough in box for mounting the HS4000 central vacuum trim kit where installation in a wall cavity is not desired. Typical applications are mounting in a cabinet, closet, or on an external wall. (HS4000 Trim Kit purchased separately). Review HS4000 installation guide and Stand Alone Installation Guide before installing Stand Alone Mounting Kit.
HS5000 Valve Locking Sleeve Replacement Kit includes Rubber Sleeve, four screws and nuts, 8 nylon washers, and an instruction sheet. (Before removing the valve from the wall, the whole hose must be removed from the valve).
HS4000 Valve Sleeve Replacement Kit includes a Top Cap, Rubber Sleeve, six screws, and an instruction sheet. This replacement kit can be used for either HS3000 or HS4000 valves. (Before removing the valve from the wall, the whole hose must be removed from the valve).
The Hide-A-Hose Mini Valve is a cost effective quick-clean solution designed for laundry rooms, master bathrooms, or garages. This valve is 20% smaller than the full featured HS5000 valve. The Mini Valve does not have a locking mechanism so the hose must be pulled all the way out to make a lock and seal. This Mini Valve Garage Kit comes with a Rough-In Frame, Hide-A-Hose Mini Valve, and a 22 ft hose.
The Hide-A-Hose Mini Valve is a cost effective quick-clean solution designed for laundry rooms, master bathrooms, or garages. This valve is 20% smaller than the full featured HS5000 valve. The Mini Valve does not have a locking mechanism so the hose must be pulled all the way out to make a lock and seal. This Mini Valve Garage Kit comes with a Rough-In Frame, Hide-A-Hose Mini Valve, and a 40 ft hose.
1-Step PVC cement is a self-priming PVC pipe glue that requires no additional primer. Can be used on all classes of rigid and flexible PVC pressure pipe, including Schedule 80, up to 6” in diameter, and 8” diameter on non pressure rigid and flexible PVC pipe.
The Ready Grip handle has an ergonomic design and soft touch finish, making vacuuming more comfortable. The quick-connect button lock makes a fast and secure connection with the Comfort Seal ratchet wand (See HS502130). With this handle, the Hide-A-Hose system will be turned on and off with the low voltage switch at the wall inlet.
The RF Ready Grip Kit offers the convenience of turning the Hide-A-Hose central vac system on or off with the handle, using a wireless RF (radio frequency) signal. The Ready Grip handle has an ergonomic design and soft touch finish, making vacuuming more comfortable. The quick connect button lock makes a fast and secure connection with the Comfort Seal ratchet wand (See HS502130). The RF Ready Grip Kit includes: RF Ready Grip handle with F915 transmitter, F915 receiver, power adapter, 2 wires for connection to power unit. With this handle, the Hide-A-Hose system can be turned on and off with the RF signal from the handle, or with the low voltage switch at the wall inlet.
The RF Ready Grip Sender Only is available to add additional handles to a RF Ready Grip Kit. This is the same handle that is included with the RF Ready Grip Kit (see HS302181 RF Ready Grip Kit for details). Multiple handles (up to 10) can be programmed to one receiver. (Please note: the frequency of the RF Ready Grip Sender Only must match the frequency of the receiver box. The frequency number (example: RF915) is on the front of the receiver box, installed near the power unit).