Showing 31–45 of 46 results
-
HS5000 Valve Trim Kit
$249.95The Valve Trim Kit includes: inlet valve, finish door, low-voltage switch, 4 screws, 2 wire nuts. New features include smaller size, improved rubber door seal, improved hose-locking system, simple on/off switch, adjusts to wall thicknesses up to 1 ½ inches (3.8 cm). Available in white or almond. Refer to HS5000 installation guide for valve trim instructions.
-
Hose End Cap, Black (Hose Kit)
$1.61The black end cap fits into the end of a Hide-A-Hose Hose Kit, holding the sock in place. (Black and white end caps are NOT interchangeable).
-
Hose End Cap, White (RapidFlex)
$2.58The white end cap fits into the end of a Hide-A-Hose RapidFlex Hose, keeping the end of the hose round. (Black and white end caps are NOT interchangeable).
-
RapidFlex Mini-Cuff (Blue 1 3/8”)
$2.69The Hide-A-Hose RapidFlex Mini-Cuff connects the hose to a Ready Grip Direct Connect handle.
The Mini-Cuff also offers the convenience of connecting directly to accessories included in the tool kits.
This cuff is 1 3/8” and will only fit the RapidFlex hose. (See HS5000H4 for a SmartSoc hose cuff.)
The mini-cuff acts as a stop when the hose is retracted into the valve. If the cuff comes off the hose, screw the cuff back into the hose, counterclockwise, until it is firmly seated against the end of the hose. If the end of the hose has been damaged, trim off 2” – 3” with sharp scissors before installing the new cuff. Do not retract the hose without the cuff.
(If additional friction is needed to hold the hose in place when closing the valve door, the mini-cuff accepts 1 or 2 O-Rings. See Part#HS500123)
-
SmartSoc Mini-Cuff (Black 1 ¼”)
$1.75The Hide-A-Hose SmartSoc Mini-Cuff connects the hose to a Ready Grip Direct Connect handle.
The Mini-Cuff also offers the convenience of connecting directly to accessories included in our tool kits.
This cuff is 1 ¼” and will only fit the SmartSoc hose. (See HS5000H5 for a RapidFlex hose cuff.)
The mini-cuff acts as a stop when the hose is retracted into the valve. If the cuff comes off the hose, tuck ¼” – ½” of sock into the hose and screw the cuff back into the hose, counterclockwise, until it is firmly seated against the end of the hose. Do not retract the hose without the cuff.
(If additional friction is needed to hold the hose in place when closing the valve door, the mini-cuff accepts 1 or 2 O-Rings. See Part#HS500121)
-
RapidFlex Cuff/O-Ring Kit
$3.53RapidFlex Mini-Cuff replacement kit includes HS5000H5 Mini-Cuff (blue – 1 3/8”) and two O-Rings.
-
SmartSoc Cuff/O-Ring Kit
$3.53SmartSoc Mini-Cuff replacement kit includes HS5000H4 Mini-Cuff (black – 1 ¼”) and two O-Rings.
-
O-Ring for Mini-Cuff 10-Pack
$2.6410-pack of O-rings (218 Duro 70 Buna-N Nitrile) for either HS5000H4 SmartSoc cuff or HS5000H5 RapidFlex cuff.
-
Hose Sock Replacement Kit
$46.68 – $89.33Hose sock replacement kits include a hose sock pre-loaded on a cardboard tube and a tension guide for ease of installation. Refer to Hose Sock Replacement Instructions.
NOTE: This item should only be used to replace the hose sock on a SmartSoc hose and is Not for use on a RapidFlex hose. The RapidFlex hose is a larger diameter than the SmartSoc hose.
-
SmartSoc Hose
$105.95 – $190.95Hose kits include a pre-installed sock that protects millwork and furniture. Our new hose kits feature the mini-cuff, which allows tools to fit directly onto the hose cuff for easier use. Hose lengths can be customized to fit the home-owner’s needs. Refer to How to Customize Hose Length. A hose kit can be washed without removing the sock. Remove the entire hose kit from the valve and wash the hose w/sock in a bathtub using a small amount of dish or laundry soap. Rinse thoroughly and hang to dry before retracting back into the valve.
-
RapidFlex Hose (mini-cuff)
$88.95 – $172.95RapidFlex central vacuum hoses are made of scratch resistant material that does not require a hose sock. RapidFlex hoses pull out more easily and retract faster than hose kits, and are a larger diameter, increasing air flow 20 -30%. Our new RapidFlex hoses feature the mini-cuff, which allows tools to fit directly onto the hose cuff for easier use. Hose lengths can be customized to fit the home-owner’s needs. Trim desired length from end of hose that goes in valve first, then replace end cap into trimmed end (Do not trim the cuff-end of hose).
-
Smooth Adapter
$5.201 ¼” male/male adapter for connecting female hose cuff to Direct Connect handle, or female hose cuff to tools.
-
Ready Grip Direct Connect w/o RF
$69.95The Ready Grip handle has an ergonomic design and soft touch finish, making vacuuming more comfortable. The quick-connect button lock makes a fast and secure connection with the Comfort Seal ratchet wand (See HS502130). With this handle, the Hide-A-Hose system will be turned on and off with the low voltage switch at the wall inlet.
-
RF 915 Ready Grip Direct Connect Kit
$219.95The RF Ready Grip Kit offers the convenience of turning the Hide-A-Hose central vac system on or off with the handle, using a wireless RF (radio frequency) signal. The Ready Grip handle has an ergonomic design and soft touch finish, making vacuuming more comfortable. The quick connect button lock makes a fast and secure connection with the Comfort Seal ratchet wand (See HS502130). The RF Ready Grip Kit includes: RF Ready Grip handle with F915 transmitter, F915 receiver, power adapter, 2 wires for connection to power unit. With this handle, the Hide-A-Hose system can be turned on and off with the RF signal from the handle, or with the low voltage switch at the wall inlet.
