Showing 49–61 of 61 results
-
Hose End Cap, Black (SmartSoc)
$7.75The black end cap fits into the end of a Hide-A-Hose Hose SmartSoc Hose, holding the sock in place. (Black and white end caps are NOT interchangeable).
-
Hose End Cap, White (RapidFlex)
$7.25The white end cap fits into the end of a Hide-A-Hose RapidFlex Hose, keeping the end of the hose round. (Black and white end caps are NOT interchangeable).
-
RapidFlex Mini-Cuff (Blue 1 3/8″)
$3.95The Hide-A-Hose RapidFlex Mini-Cuff connects the hose to a Ready Grip Direct Connect handle.
The Mini-Cuff also offers the convenience of connecting directly to accessories included in the tool kits.
This cuff is 1 3/8” and will only fit the RapidFlex hose. (See HS5000H4 for a SmartSoc hose cuff.)
The mini-cuff acts as a stop when the hose is retracted into the valve. If the cuff comes off the hose, screw the cuff back into the hose, counterclockwise, until it is firmly seated against the end of the hose. If the end of the hose has been damaged, trim off 2” – 3” with sharp scissors before installing the new cuff. Do not retract the hose without the cuff.
(If additional friction is needed to hold the hose in place when closing the valve door, the mini-cuff accepts 1 or 2 O-Rings. See Part#HS500123)
-
SmartSoc Mini-Cuff (Black 1 ¼”)
$3.97The Hide-A-Hose SmartSoc Mini-Cuff connects the hose to a Ready Grip Direct Connect handle.
The Mini-Cuff also offers the convenience of connecting directly to accessories included in our tool kits.
This cuff is 1 ¼” and will only fit the SmartSoc hose. (See HS5000H5 for a RapidFlex hose cuff.)
The mini-cuff acts as a stop when the hose is retracted into the valve. If the cuff comes off the hose, tuck ¼” – ½” of sock into the hose and screw the cuff back into the hose, counterclockwise, until it is firmly seated against the end of the hose. Do not retract the hose without the cuff.
(If additional friction is needed to hold the hose in place when closing the valve door, the mini-cuff accepts 1 or 2 O-Rings. See Part#HS500121)
-
RapidFlex Cuff/O-Ring Kit
$4.02RapidFlex Mini-Cuff replacement kit includes HS5000H5 Mini-Cuff (blue – 1 3/8”) and two O-Rings.
-
SmartSoc Cuff/O-Ring Kit
$6.73SmartSoc Mini-Cuff replacement kit includes HS5000H4 Mini-Cuff (black – 1 ¼”) and two O-Rings.
-
O-Ring for Mini-Cuff 10-Pack
$12.7310-pack of O-rings (218 Duro 70 Buna-N Nitrile) for either HS5000H4 SmartSoc cuff or HS5000H5 RapidFlex cuff.
-
PVC Cement Glue
$13.951-Step PVC cement is a self-priming PVC pipe glue that requires no additional primer. Can be used on all classes of rigid and flexible PVC pressure pipe, including Schedule 80, up to 6” in diameter, and 8” diameter on non pressure rigid and flexible PVC pipe.
-
RF 915 Ready Grip Direct Connect Kit
$311.95The RF Ready Grip Kit offers the convenience of turning the Hide-A-Hose central vac system on or off with the handle, using a wireless RF (radio frequency) signal. The Ready Grip handle has an ergonomic design and soft touch finish, making vacuuming more comfortable. The quick connect button lock makes a fast and secure connection with the Comfort Seal ratchet wand (See HS502130). The RF Ready Grip Kit includes: RF Ready Grip handle with F915 transmitter, F915 receiver, power adapter, 2 wires for connection to power unit. With this handle, the Hide-A-Hose system can be turned on and off with the RF signal from the handle, or with the low voltage switch at the wall inlet.
-
Ready Grip Direct Connect w/o RF
$91.37The Ready Grip handle has an ergonomic design and soft touch finish, making vacuuming more comfortable. The quick-connect button lock makes a fast and secure connection with the Comfort Seal ratchet wand (See HS502130). With this handle, the Hide-A-Hose system will be turned on and off with the low voltage switch at the wall inlet.
-
RF 915 Ready Grip Direct Connect Sender Only
$174.95The RF Ready Grip Sender Only is available to add additional handles to a RF Ready Grip Kit. This is the same handle that is included with the RF Ready Grip Kit (see HS302181 RF Ready Grip Kit for details). Multiple handles (up to 10) can be programmed to one receiver. (Please note: the frequency of the RF Ready Grip Sender Only must match the frequency of the receiver box. The frequency number (example: RF915) is on the front of the receiver box, installed near the power unit).
-
Smooth Adapter
$8.361 ¼” male/male adapter for connecting female hose cuff to Direct Connect handle, or female hose cuff to tools.
