Explore our selection of Hide-A-Hose valves and valve parts, including replacement components and essential hardware to maintain, repair, and ensure reliable operation of your retractable central vacuum system.
Showing 1–16 of 21 results
-
6000 PRO Rough-In Valve Kit
$218.95The 6000 PRO Rough-In Valve Kit is required for both new construction and retro-fit installations. The Rough-In Valve Kit includes: 1 rough-in valve, 1 mounting brace, 1 reducer, 1 yellow mud cover, 4 mud cover screws, and a leveling shim in case the stud is not level.
The New 6000 PRO features a simple and intuitive Push and Pull lock, giving you the flexibility to clean at any length of hose. The valve housing is now installed during the rough-in process (unlike previous Hide-A-Hose valves where the valve housing was installed at trim). The 6000 PRO is mounted to the inside of the stud to avoid drywall bowing, which can occur with other central vacuum valves which mount to the front of the stud.
-
6000 PRO Trim Kit
$70.55The 6000 PRO Trim Kit includes the finish door with a low-voltage switch, 4 screws, and 2 spade connectors.
The 6000 PRO has an enlarged sealing surface on the door to ensure maximum cleaning power. The door opens and closes with a smooth, solid feel enhanced by magnets. The magnets are pressed in from the back, keeping them out of reach of children. The Trim Door works with a wall thickness of up to 1″. For thicker walls, Door Extension Kits are 3/4″ and can be easily glued and stacked to adjust for wall thickness. Low voltage wires connect directly to the switch included on the Trim Kit Door.
-
HS6000 PRO Pre-Plumb Rough-In Kit
$54.95Pre-plumb rough-in kit designed for Hide-A-Hose HS6000 PRO installations where the system is being roughed in during construction but may not be fully trimmed out at project completion. Commonly used by dealers and builders in production housing developments as a lower-cost alternative to installing a full HS6000R Rough-In Kit before the homeowner commits to the complete system.
The HS600055 includes a reusable pre-plumb rough-in component along with a finished trim cover that installs in place of the final valve assembly, providing a clean finished appearance until the system is upgraded.
When the homeowner is ready to complete the installation, the HS600055 can be removed and replaced with a standard HS6000R Rough-In Kit and HS6000 PRO Trim Kit. The pre-plumb rough-in components can then be reused on future pre-plumb projects, helping reduce installation costs and wasted materials.
-
6000 PRO Mounting Box
$45.95The 6000 PRO Mounting Box allows the 6000 PRO Valve to be installed on the surface of a wall, making it an ideal solution for garages, workshops, and commercial spaces.
Available in grey, white, or black, the 6000 PRO Mounting Box combines functionality with versatility to suit a variety of settings. This Mounting Box is not necessary for regular in-wall installation. -
6000 PRO Mounting Box: Carbon Fiber Reinforced
$97.56The 6000 PRO Mounting Box allows the 6000 PRO Valve to be installed on the surface of a wall, making it an ideal solution for garages, workshops, and commercial spaces.
The Carbon Fiber Reinforced material is available in Titan Gray or Black. The 6000 PRO Mounting Box combines functionality with versatility to suit a variety of settings. This Mounting Box is not necessary for regular in-wall installation. -
6000 PRO Extension Kit
$25.87The standard door on the 6000 PRO trims out with a wall thickness of up to 1”. For thicker walls, the Door Extension Kit can be easily glued to the door to adjust for wall thickness. The Door Extension Kit is 3/4″. For extreme scenarios, multiple Door Extension Kits can be glued and stacked together.
-
HS6000 Conversion Kit from HS4000 Valve
Price range: $298.90 through $315.95Conversion kit designed to upgrade existing Hide-A-Hose HS4000 valves to the newer 6000 PRO valve.
Includes the Conversion Plate, 6000 PRO Rough-In Kit (HS6000R), and the 6000 PRO Almond Trim Kit (HS6000A) for a cleaner appearance and updated functionality without requiring sheetrock repair.
Ideal for retrofit projects, service upgrades, or replacing damaged HS4000 valves.
-
HS5000 Valve Rough-In Kit
$48.95This Rough-In Frame is required for HS5000 new construction or retro-fit installations (exception: installation with concrete wall kit). The Rough In Kit includes: 1 rough in frame, 1 rough in pipe fitting, 1 reducer, 1 mud cover, 4 mud cover screws.
-
HS5000 Valve Trim Kit
Price range: $252.95 through $255.95The Valve Trim Kit includes: inlet valve, finish door, low-voltage switch, 4 screws, 2 wire nuts. New features include smaller size, improved rubber door seal, improved hose-locking system, simple on/off switch, adjusts to wall thicknesses up to 1 ½ inches (3.8 cm). Available in white, black, or almond. Refer to HS5000 installation guide for valve trim instructions.
-
HS3000/HS4000 Valve Rough-In Kit
$55.55HS3000 Rough-In Frame is required for the HS4000 Valve new construction or retro-fit installations. The Rough-In Kit includes: 1 rough in frame, 1 rough in pipe fitting, 1 reducer, 1 mud cover, 1 retainer band, 4 mud cover screws. Refer to HS4000 installation guide for mounting instructions.
-
HS4000 Valve Trim Kit
Price range: $248.51 through $252.95The Valve Trim Kit includes: inlet valve, finish door, low voltage switch, 4 screws, 2 wire nuts, 1 silicone pack. Available in white, almond, or black. Refer to HS4000 installation guide for valve trim instructions.
-
5000 Pre-Plumb Trim Cover
$49.95Finished trim cover designed for pre-plumbed Hide-A-Hose 5000 Series installations where the system is being roughed in during construction but not fully trimmed out at project completion. Commonly used by dealers working with production builders and large housing developments where the homeowner may choose to purchase and complete the Hide-A-Hose system at a later date.
The Pre-Plumb Trim Cover is Installed in place of the HS5000 Valve Trim Kit to provide a clean finished appearance while covering the rough-in valve opening until the system is installed.
-
Stand Alone Mounting Kit for HS4000 Valve
$112.59The Stand Alone Mounting Kit is a 2-part rough in box for mounting the HS4000 central vacuum trim kit where installation in a wall cavity is not desired. Typical applications are mounting in a cabinet, closet, or on an external wall. (HS4000 Trim Kit purchased separately). Review HS4000 installation guide and Stand Alone Installation Guide before installing Stand Alone Mounting Kit.
-
Hide-A-Hose Original Valve Conversion Frame
Price range: $34.30 through $36.02This conversion frame is installed when converting from the original HS2000 series valves to HS4000 valves. The conversion frame is used as an alternative to sheetrock repair. For conversion, 1-HS3000 Rough-In Kit, 1-HS4000 trim kit, and 1-conversion frame are required. Available in white (HS300051) or almond (HS300052). Refer to HAH Trim Conversion Installation Guide.
